M4735A Power Supply Board Assembly
XL M4735A Defibrillator Power Supply Assembly M4735-40016
Brief Description
The M4735A Power Supply Board Assembly is a device that provides a regulated DC power supply for the XL M4735A Defibrillator and charges the battery. The part number is M4735-40016. Included with this Power Supply is a plastic insulator that you can place inside the power supply stand for use.
Specifications
Brand |
|
Applicable Machine |
XL M4735A Defibrillator |
Part Number |
M4735-40016 |
Product Category |
Defibrillation |
Product Type |
Power Supply |
Condition |
In Good Working |
Color |
Green |
Removal
1. Remove the screws.
a. Orient the M4735A so that the end of the bottom case overhangs the work surface.
b. Remove the two T15 screws securing the power supply.
Tip: Another way to remove the screws is to mate the two halves of the case together, turn the case upside down, and remove the screws. Then flip the case right side up and separate the two halves of the case.
2. Disconnect the power supply.
a. Disconnect the 2-pin in-line connector from the battery PCA; press the latch to release.
b. Disconnect the 6-pin connector from the Power PCA; press the latch to release.
c. Disconnect the 4-pin connector from the Power PCA; press the latch to release.
3. Lift the defibrillator capacitor out.
Lift the defibrillation capacitor with its foam base. Lift straight up, then turn the capacitor to the right and place it on the Power PCA.
4. Remove power.
Tilt the top of the power supply toward the Power PCA. Feed the power supply out of the end of the power supply PCA and lift it out of the case.
5. Remove the power insulator (if present).
Detailed Photos
Thank you for your time, if you are interested in XL M4735A Defibrillator Power Supply Assembly M4735-40016, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours, wish you a happy life.