M Series Defibrillator Printer Assembly: Paper Sensor Board, Recorder Motor, Print Head, Printer Connection Cable, Paper Tray Guide

• Customization: Available
• Customized: Non-Customized
• Product Category: Defibrillation
• Model NO.: M Series
• Product Type: Printer Assembly and Parts
• Condition: Used with Good Condition
• Warranty: 90 Days
• MOQ: 1 Piece
• Transport Package: Carton

Product Description

M Series Defibrillator Printer Assembly and Parts
M Series Defibrillator Printer Assembly: Paper Sensor Board, Recorder Motor, Print Head, Printer Connection Cable, Paper Tray Guide
 

Product Description

M Series Defibrillator Printer Assembly: Paper Sensor Board, Recorder Motor, Print Head, Printer Connection Cable, Paper Tray Guide - The defibrillator has a thermal printing device, which can print the detected patient data through thermal printing technology. Printed on paper for users to refer to, helping them make more accurate clinical judgments and decisions.
These parts are second-hand but original and tested to ensure complete performance. We can test it again for you before shipping to ensure your rights.

 

Specifications

Brand
Product Category	Defibrillation
Product Type	Printer Assembly and Parts
Product Item	Printer Paper Sensor Board, Printer / Recorder Motor, Print Head, Printer Connection Cable, Print Head Support / Paper Tray Guide
Paper Sensor Board	9300-0305 9301-0305 1001-0131
Printer / Recorder Motor	C26M048A30-V 5VDC 9320-0305
Print Head	GPA0025-03N 9320-0400/A
Print Head Support / Paper Tray Guide	9310-0510
Condition	Used With Good Condition
Warranty	90 Days
Delivery Time	3 - 5 Working Days
MOQ	1 Piece
Price	Accept Negotiation

 

More Deatils

M Series Defibrillator Printer Paper Sensor Board 9300-0305 9301-0305 1001-0131 - Sometimes, a "CHECK RECORDER" problem may occur during the printing process, which generally means that the paper tray is empty, paper is jammed, or the recorder door is open The solution is to replace the paper sensor board, system interconnect board, and/or system board.

Removing the Printer/Recorder Motor
1. Remove the tray, pull out and press up on the locking tab on the rear of the tray.
2. Remove the front panel assembly.
3. Remove the upper housing assembly.
4. Remove the system board.
5. Remove the battery interconnect board.
6. Remove the high voltage module assembly.
7. Remove the sensor, printhead, and motor cables.
8. Remove the system interconnect board.

Removing the Print Head Assembly
1: Unscrew the two screws on the paper tray guide, and then remove the paper tray guide.
2: Disconnect the ribbon cable from the printhead.
3: Remove the pivot pin for reuse.

 

Detailed Photos

 

If you are interested in M Series Defibrillator Printer Assembly: Paper Sensor Board, Recorder Motor, Print Head, Printer Connection Cable, Paper Tray Guide,please feel free to contact us.