| Customized: | Non-Customized |
|---|---|
| Warranty: | 90days |
| Applicable Equipment: | MP50 |
| Use Place: | Hospital Devices; Medical Care; ICU; |
| Size: | 12 Inch |
| Application: | Patient Monitor |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier MP50 LCD assemble M8003-00112
MP50 patient monitor LCD display assemble M8003-00112 Rev 0710 2090-0988 M800360010
MP50 LCD assemble M8003-00112 is the screen assembly on the MP50 patient monitor. It is the unique wear-resistant touch surface of the MP50 patient monitor. The touch screen and the display are together. It is a collection of screens. If you replace it, you can only Replace them together.
The MP50 patient monitor uses a 12-inch TFT LCD flat panel SVGA display with high-resolution waveform and data display. The screen of the MP50 patient monitor can display up to six measurement data waveforms at a time, and can display 12 ECG traces when using the 12-lead ECG function. It is a very powerful LCD assembly.
The interface of LCD display M8001-60011 M8001-00111 is composed of video controller chip, video RAM and control software. The display controller interface handles display commands within the device, such as character and graphics generation, or instructions such as waveform graphics, and then converts these instructions into specific pixels.
These pixels will be written into the video RAM, and then the controller chip will generate video and synchronize these signals and pixels to the color LCD display on the monitor device. It becomes the changes in the patient's vital signs data that everyone sees on the monitor.
External Touch Display not functioning :
| Possible Causes of Failure | Failure Isolation and Remedy |
| External Touch cable not connected | Check cable connection from external touch to MIB board |
| Main board defective | Replace Main board |
| External touch defective | Replace external touch |
| Touchscreen functionality has been permanently disabled | In service mode, select Main Setup -> User Interface and change the "Touch Enable" selection to "yes". |
| MIB Board defective | Replace MIB board |
| External Touch driver configuration | Check RS232/MIB configuration: 1. Enter Main Setup menu 2. Select Monitor 3. Select Hardware 4. Reconfigure RS232/MIB drivers 5. if problem persists, proceed to the next step |
Composition :
MP50 LCD assemble M8003-00112 is mainly composed of cover glass, touch module, display module and other main parts. Among them, the cover glass is the outermost protective part of the screen of the MP50 patient monitor; the touch module is the key link to improve the interactive experience between the user and the MP50 patient monitor; and the screen display module of the MP50 patient monitor is The LCD is mainly composed of polarizers, color filters, liquid crystals, TFTs, backlights, etc. It is the display screen used in the current MP50 patient monitor.
They constitute the LCD screen assembly of the MP50 patient monitor, which are very precise parts and one of the main components of the MP50 patient monitor. Without this component, the MP50 Patient Monitor cannot be called a piece of equipment, but rather a collection of parts. So MP50 LCD assemble M8003-00112 is your best choice for complete MP50 patient monitor.
Thank you for your time, if you are interested in MP50 patient monitor LCD display assemble M8003-00112 Rev 0710 2090-0988 M800360010 , please feel free to contact us, we can introduce you more details.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}